KEOGH'S range of PENCIL AUGERS span from 100 mm units up to 250 mm units and can be configured as required. They can be setup as a simple out-feeding auger from a silo hopper or fitted to an adjustable undercarriage for mobility.

As standard units they are available in lengths from 1 metre through to 150 metres.

Choose your drive options from mains electric, 12 or 24 volt DC electric, petrol or hydraulic. Units fitted to an undercarriage can be fixed height or fitted with a winch to make the outlet height variable. They can be fitted with top drives (at the outlet end of the auger) or bottom drives (at the inlet end of the auger) and can be made to suit silo or roller mill outlets or just about any other connection type. They really are a truly UNIVERSAL AUGER.

Choose you finish from standard enamel paint or hot dip galvanized.

All units come with full guarding, an instruction manual and most importantly ready for use.

Our STANDARD ISSUE for PENCIL AUGERS include (but is not limited too):-

• Large size shafts and bearings,
• Full guarding kit,
• Belt and pulley or geared motor units (geared motors have no drive train-the gearbox is fitted onto the auger shaft !!) and
• Are pre-assembled ready and use,

Don't hesitate to call and ask anything about our range of PENCIL AUGERS. We've been making them for so long there really is no configuration we can't supply.