Back to Products

B. Keogh & Sons
Manufacturing PTY LTD.

York Street,
Eaglehawk, 3556
Victoria AUSTRALIA

PH: 03 5446 8377
Fax: 03 5446 1178

A.C.N. 006 377 215
ABN 76 006 377 215

 

Use the easy locator to find B. Keogh & Sons. Just enter your address to get directions...

 

Address :

City :

State :

Postcode :

Country :

 

DISCLAIMER

Every effort has been made to ensure the accuracy of information on this page. However, B. Keogh & Sons Manufacturing Pty Ltd cannot accept responsibility for errors or omissions. It is our practice to continually improve our products, therefore changes in design and specifications may occur and we reserve the right not to automatically incorporate such changes to any previously supplied equipment.

Roof Augers

KEOGH'S range of SILO ROOF AUGERS complements an installation of large flat bottom silo's and SILO UNLOADERS by effectively filling the silo complex and ensuring safe conveying of the grains with minimal kernel crackage.

As standard units these units are made to suit MEC (Kotzur) silo's and SMORGAN CYCLONE silo's, but we can manufacturer them to suit other silo brands also.

Choose your drive options from mains electric, or hydraulic. All units are fitted with ground based controls for opening of the weather proof inlet hopper. Similarly, the unit is fitted with a clean out door at the lowest point (on the underside of the inlet hopper) and a fully seal-able silo centre fill cap. Mounts are also supplied with the units.

Standard finish for these units is hot dip galvanized to protect the unit from the weather and to ensure a long machine life. Connection of the unit to the silo roof is easy with an eave mount and a centre fill mount (a mid auger mount may be required depending on the auger length).

All units come with full guarding, an instruction manual and most importantly ready for use. Standard material thickness is 2 mm for the barrel and 3.5 mm for the flite. Optional 3 mm barrel and 4.8 mm flite is available but adds a considerable amount of weight to the entire unit (this may require engineering calculations to ensure the weight can be supported by the silo roof. Speak to the silo manufacturer about this extra weight).

Unit sizes include augers to suit the popular 9.6, 11.4 or 13.7 metre MEC silo's and the abundant 30', 36', 42' and 48' SMORGAN CYCLONE silo's. Unit diameters are 200 m (8"), 250 mm (10"), 300 mm (12") and the impressive 350 mm (14").

Our STANDARD ISSUE for SILO ROOF AUGERS includes (but is not limited too):-

  • A weather proof inlet hopper
  • Large size shafts and bearings
  • Full guarding kit
  • Ground based lid controls
  • Clean out door
  • Hot dip galvanizing to the entire assembly (excluding the flite)
  • Are fitted with a central hanger bearing (for units 7 metres long and over)
  • Have a belt and pulley drive (electric units) or direct drive with flexible coupling (hydraulic units) and
  • Are pre-assembled ready for lifting into position and use

Don't hesitate to call and ask anything about our range of SILO ROOF AUGERS.

 Roof Augers 

Click here to download the SILO ROOF AUGER brochure (172 kb PDF)

Designed & Powered By AUH Internet
Copyright © 2010 B. Keogh & Sons. All Rights Reserved.